accumax20@gmail.com   +(91)-9310511109
Home / Our Products / Biological Safety Cabinet

Biological Safety Cabinet

Bio Safety Cabinets Are Used To Contain Particulates Within A Particular Work Area. These Particulates Are Usually Biological Agent. They Do Not Control Gaseous Contaminants In Any Way. They Are Primarily Used To Allow Laboratory Workers To Work With Infectious Agents Without Becoming Exposed To The Agents. Laminar Air Flow Biological Safety Cabinet Complies With The Guidelines Laid Down By U.S. National Institute Of Health, And The Specifications Of British Standard 5726 Appendix A For Class II Biological Safety Cabinet. It Is An Integral Factory Assembled System. The Unit Is Of Stainless Steel 304 Grade Housing, Pre Filters, HEPA Filters & Blowers Assembly Etc. It Is Suitable For Handling Medium To High Risk Organisms Encountered In Research, Investigation, Labs In All Branches Of Medical, Agriculture, And Pharmaceutical Science.
Bio Safety Cabinet Type A-2, Class II
Bio Safety Cabinet Class II Also Have An Open Front Design Provided With Negative Pressure Generation Module. This Equipment Provides Recirculation Of Mass Flow Of HEPA Filtered Air. This Type Of Bio Safety Cabinets Provides Excellent Protection To Users, Products And The Environment.

Construction
Bio Safety Cabinet Is Designed To Conform To The United State Federal Standard 209B/BS5295 And Meets The Class 100 Conditions Along With British Standard 5726-Appendix A. Our Units Are Fabricated Of Galvanized Iron Powder Coated/ Stainless Steel. The Side Panels Made Out Of Heavy Plexi Glass Sheets Are Mounted On Anodized Aluminum Frames. The Whole Unit Is Supplied With Manometer To Gauge The Pressure Drop In The Unit While Operation, Beside The Gas Cock, Power Socket Etc.

Filter Assembly
Fitted With Fully Washable Synthetic Pre-Filter Units And Secondary High Efficiency Perfect Air Filters Made Of Mini Pleated Non Woven Fabric. The Efficiency Of Our Filters Have A Rating Better Than 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Our Units Have The Capacity To Hold All Suspended Particles Of Size > 0.3 Micron.

Motor And Blower Assembly
Provided With Perfectly Balanced (Static As Well As Dynamic) Motor And Blower.

Illumination
Illumination At The Work Table By Means Of LED Lights Panel Concealed At The Upper Portion Of The Unit.

Ultra Violet Light
Is Incorporated In The Illumination Panel Of Our Bio Safety Cabinets To Take Care Of The Sterilization Of The Existing Air Present In The Enclosure, Thus Ensuring The High Standard Of Cleanliness In Our Equipment Before The Commencement Of Actual Working.

Noise Level
Our Bio Safety Is Designed To Ensure That The Work Enclosure Has Minimum Possible Vibration Levels And Noise Level Is Also Contained Below 70 db.
biosafety cabinet type A2 Class 2-manufacturers
Technical Specification
Cleanliness Class 100
Velocity 90 Feet / Min±20
Noise Level 65 Decibels ± 5% On A Scale
Hepa Filter Media Glass Fiber Paper-Imported
Particle Retention 0.1 Micron
Efficiency 99.999 %
Pressure Drop 23 mm Wg
Size-At Exhaust 6"x 6" x 6"
Pre-Filter Non Woven-Synthetic Polyester
Particle Retention 10 -15 Micron
Efficiency 90%
Pressure Drop 6 mm Wg
Blower Assembly By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller. Capacity 1000 CFM Pressure 30 mm Wg
Exhaust Assembly By Motor of ¼ HP, Single Phase, 1440 RPM Motor, Directly Coupled With A Aluminum Impeller. Capacity - 300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia - 150 mm
Ultra Violet Lamp Philips/Osram Make
Illumination LED
Standard Accessories Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Levelling Screws, Wire Cord
Power Supply 220 V, Single Phase, 50 Hz
Working Area W 900 x D 600 x H 600mm
W 1200 x D 600 x H 600mm
W 1800 x D 600 x H 600mm

Bio Safety Cabinet Type B-2, Class II
This Type Of Biosafety Cabinet No Circulation Takes Places Inside Workspace And The Blower Will Exhaust All The 100% Of The Filtered Air.

Construction
Made Of Galvanized Iron Powder Coated / Stainless-Steel Sheet. The Work Zone Having Negative Pressure While A Microprocessor Controls Cabinet Functions. Further, An LCD Panel Is Fitted To Display The Monitoring Of The Cabinet Air Flow And A Blower Run Meter Is There To Track Operating Life.

Illumination
Fitted With Light With Optimal Wattage Ultra Violet Light To Ensure High Level Of Cleanliness Before Operation.

Noise Level
Deliver Extremely Low Noise Level Of Less Than 70 db And Also Provide Minimum Vibration Levels.

Filter Assembly
Equipped With Synthetic Pre-Filter Unit Washable And High-Efficiency Filters (Secondary) That Are Made Of Mini Pleated Hepa Non-Woven Fabric. The Filters Deliver An Efficiency Rating Which Is 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Can Hold All Suspended Particles Of Size More Than 0.3 Micron.

Motor And Blower Assembly
Fitted With Balanced Motor And Blower. The Assembly Comes With The Rating Of ¼ HP.

In Addition To Normal Feature Of Biosafety Vertical Laminar Flow, It Is Provided With Following Unique Features:
  • 100% Exhaust.
  • Sliding Sash - Renders Unit Convertible For Use As A Conventional Vertical Laminar Down Flow Clean Air Work Station
  • Filtered Exhaust - Protects Ambient Environment, And Avoids Build Up, Air Borne Particles.
  • Glove Ports And Gauntlets- Permits Working With Medium To High Risk Organisms, Pathogenic Cultures Or That Tend To Aerosolize In Unknown Concentration
  • Built In U.V. Germicidal Light-Facilitates Sterilization Of Working Area Before And After Use
  • Cock-For Gas, Air Or Vacuum
biosafety cabinet type Type B-2, Class II-manufacturers
Technical Specification
Cleanliness Class 100
Velocity 90 Feet / Min±20
Noise Level 65 Decibels ± 5% On A Scale
Hepa Filter Media Glass Fiber Paper-Imported
Particle Retention 0.1 Micron
Efficiency 99.999 %
Pressure Drop 23 mm Wg
Size-At Exhaust 6"x 6" x 6"
Pre-Filter Non Woven-Synthetic Polyester
Particle Retention 10 -15 Micron
Efficiency 90%
Pressure Drop 6 mm Wg
Blower Assembly By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller. Capacity 1000 CFM Pressure 30 mm Wg
Exhaust Assembly By Motor of ¼ HP, Single Phase, 1440 RPM Motor, Directly Coupled With A Aluminum Impeller. Capacity - 300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia - 150 mm
Ultra Violet Lamp 3 Feet, 30 Watt - Philips/Osram Make
Illumination 4 Feet 40 Watt-With Diffusers
Standard Accessories Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Leveling Screws, Wire Chord
Power Supply 220 V, Single Phase, 50 Hz
Working Area W 900 x D 600 x H 600mm
W 1200 x D 600 x H 600mm
W 1800 x D 600 x H 600mm



105, First Floor, Vishal Tower, District Centre Janakpuri New Delhi 110058. INDIA
+011-46125754
+91 9310511109
About Accumax India
We Are A Company Of Dedicated Professionals With The Aim Of Providing The Best Services To Our Clients. We Like To Discuss How To Solve Small Issues Without Creating Defects And Errors. We Believe That Many Small Scaled Matters Would Help To Build Stable And Sustainable Achievement.